Tag Archives: imageinfo

An Oracle Exadata database machine consists of several parts: Intel based servers, infiniband switches, a cisco ethernet switch, a KVM switch and the hardware surrounding it like cables, 19″ rack, power distribution units. The Intel based servers are what “Exadata administrators” are administering the most. The intention of this article is to let the reader gain a little more insight into Exadata specific administration on those.

Two server layers: computing and storage
The two layers have quite different properties: the Exadata computing layer is Linux with Oracle grid infrastructure and the Oracle database software installed, very much as you would do yourself (if you install it in a strict OFA way), and the storage layer is Linux too, but with specific Exadata storage software.

Computing layer
The computing layer filesystems are using LVM on newer (X2) versions of Exadata, and using plain partitions without LVM on the V2 version of Exadata. There are 3 filesystems on a X2 computing node:

[root@xxxxdb01 ~]# df -h
Filesystem Size Used Avail Use% Mounted on
30G 14G 15G 49% /
/dev/sda1 124M 16M 102M 14% /boot
99G 29G 65G 32% /u01
tmpfs 81G 196M 81G 1% /dev/shm

These are two filesystems inside logical volume, and the boot partition on a plain partition. The /boot partition consists of the grub configuration, kernel and initrd (initial ramdisk). The root logical volume (LVDbSys1) contains the linux operating system files, and the /u01 logical volume (LVDbOra1) contains the Oracle grid/cluster and database software.

A nice thing to know about the computing layer storage is that there is space left in the single volume group which is used for the logical volumes:

[root@emc1db01 ~]# vgdisplay
--- Volume group ---
VG Name VGExaDb
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 4
VG Access read/write
VG Status resizable
Cur LV 3
Open LV 3
Max PV 0
Cur PV 1
Act PV 1
VG Size 557.62 GB
PE Size 4.00 MB
Total PE 142751
Alloc PE / Size 39424 / 154.00 GB
Free PE / Size 103327 / 403.62 GB <<-- 400GB space left!
VG UUID AZbMbf-papI-6FE2-hYlR-bzE1-G4pp-Bou81e

The disk configuration on the computing layer is build upon a RAID 5 set of 3 disks with a hot spare. The RAID is hardware based (the diskcontroller is reponsible for the RAID maintenance). This is visible through the MegaCli64 command:

[root@emc1db01 ~]# /opt/MegaRAID/MegaCli/MegaCli64 -LDInfo -LALL -aALL

Adapter 0 -- Virtual Drive Information:
Virtual Drive: 0 (Target Id: 0)
Name : DBSYS
RAID Level : Primary-5, Secondary-0, RAID Level Qualifier-3
Size : 557.75 GB
State : Optimal
Stripe Size : 1.0 MB
Number Of Drives : 3
Span Depth : 1
Default Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU
Current Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU
Access Policy : Read/Write
Disk Cache Policy : Disabled
Encryption Type : None

Number of Dedicated Hot Spares: 1
0 : EnclId - 252 SlotId - 3

Exit Code: 0x00

Let me emphasize this disks/RAID-set only is responsible for serving the operating system and accompanying files, and the grid/clusterware and database executables. All true database processing is done on the storage layer nodes.

Storage layer
The storage layer filesystems are not using LVM, nor regular partitions (/dev/sd* for disks visible as SCSI devices for linux):

[root@xxxxcel01 ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/md5 9.9G 3.4G 6.0G 37% /
tmpfs 12G 0 12G 0% /dev/shm
/dev/md7 2.0G 623M 1.3G 33% /opt/oracle
/dev/md4 116M 37M 74M 34% /boot
/dev/md11 2.3G 222M 2.0G 10% /var/log/oracle

The devices used are linux software RAID devices (‘md’ means multiple devices, which is a linux device which is build from independed underlying devices). The reason for using linux software RAID for the operating system and Oracle storage software is to provide redundancy, because the underlying disks on the storage servers do not provide that. Redundancy/error protection for the databases data on the storage servers is done using ASM normal redundancy, which is, put blunt and simple, RAID 10 handled on the ASM layer.

A logical next question is: okay, how do these linux software RAID/MD devices look like? Well, the most simple way is to use /proc/mdstat:

[root@emc1cel01 ~]# cat /proc/mdstat
Personalities : [raid1]
md4 : active raid1 sdb1[1] sda1[0]
120384 blocks [2/2] [UU]

md5 : active raid1 sdb5[1] sda5[0]
10482304 blocks [2/2] [UU]

md6 : active raid1 sdb6[1] sda6[0]
10482304 blocks [2/2] [UU]

md7 : active raid1 sdb7[1] sda7[0]
2096384 blocks [2/2] [UU]

md8 : active raid1 sdb8[1] sda8[0]
2096384 blocks [2/2] [UU]

md1 : active raid1 sdb10[1] sda10[0]
714752 blocks [2/2] [UU]

md11 : active raid1 sdb11[1] sda11[0]
2433728 blocks [2/2] [UU]

md2 : active raid1 sdb9[1] sda9[0]
2096384 blocks [2/2] [UU]

unused devices:

We see the MD device name: md and a device number, the state (‘active’), the RAID type (‘raid1′) and the actual devices the md device is build from (sdb1[1] sda1[0] for example). On the next line the number of blocks in the md device, the total number of disks and the number of active disks [2/2], and the status of the disks [UU]. “U” means up. A failed device (probably as a result of a failed disk, but it could be the result of the clearing of a partition) is visible as “_”.

Okay, this is all strongly linux related, where’s the Exadata stuff?

‘Cell’ is a name used for the storage server in the Exadata context. Both the computing nodes and the storage nodes have a directory ‘/opt/oracle.cellos’. This directory contains Oracle software which is embedded in Linux. The function of cellos is to maintain and check firmware versions and hardware configurations and hardware activation/deactivation.

Validation functions are done by ‘cellos’, or ‘scripts inside the /opt/oracle.cellos directory’ during startup phase of linux. One of the functions cellos can perform is flashing firmware. Strongly related to cellos are the linux kernel and the OFED stack.

The state of the cellos image is listed using the imageinfo utility (which exists both in /usr/local/bin and in /opt/oracle.cellos), which executes the /opt/oracle.cellos/patch/bin/ script:

On a database/computing node:

[root@xxxxdb01 bin]# imageinfo -all

Kernel version: 2.6.18- #1 SMP Tue Aug 31 22:41:13 EDT 2010 x86_64
Image version:
Image created: 2010-12-09 10:06:22 -0800
Image activated: 2011-01-28 14:19:59 -0800
Image image type: production
Image status: success
Internal version:
Image label: OSS_11.
Node type: COMPUTE
System partition on device: /dev/mapper/VGExaDb-LVDbSys1

On a cell/storage node:

[root@xxxxcel01 bin]# imageinfo -all

Kernel version: 2.6.18- #1 SMP Tue Aug 31 22:41:13 EDT 2010 x86_64
Cell version: OSS_11.
Cell rpm version: cell-

Active image version:
Active image created: 2010-12-09 09:37:46 -0800
Active image activated: 2011-01-28 14:33:44 -0800
Active image type: production
Active image status: success
Active internal version:
Active image label: OSS_11.
Active node type: STORAGE
Active system partition on device: /dev/md5
Active software partition on device: /dev/md7

In partition rollback: Impossible

Cell boot usb partition: /dev/sdac1
Cell boot usb version:

Inactive image version: undefined
Rollback to the inactive partitions: Impossible

We see imageinfo knows if it’s run on a computing or storage node (‘Active node type’).

Another executable in /opt/oracle.cellos is ‘CheckHWnFWProfile’. The name of this executabe is quite self-explanory: it checks if the configuration of the server it’s run on is valid, which means it is listed in one of the profiles (Exadata has different incarnations with different hardware, of which Oracle calls the hardware and firmware combination a ‘profile’).

If it’s run without any option, it should return [SUCCESS], which means the hardware and firmware are correct for that version of cellos:

[root@xxxxdb01 ~]# /opt/oracle.cellos/CheckHWnFWProfile
[SUCCESS] The hardware and firmware profile matches one of the supported profiles

If you want more information about the server, you can list the configuration with the ‘-d’ option:

[root@xxxxdb01 ~]# /opt/oracle.cellos/CheckHWnFWProfile -d
American Megatrends Inc.
Intel(R) Xeon(R) X5670 2.93GHz
step: 2
[ILOMVersion] r58740
PCI-E Slot 0
LSI MegaRAID SAS 9261-8i
PCI-E Slot 2
FM0 FM1 FM2 FM3 4
82599EB PCI-E Slot 1
82599EB PCI-E Slot 1
Firmware Revision : 3.0

If ‘CheckHWnFWProfile’ resulted in an error, you can list your actual configuration with ‘-d’, and use the ‘-s’ option to list what the profile or supported configuration is.


Get every new post delivered to your Inbox.

Join 1,883 other followers

%d bloggers like this: